Solved

hello.I want to use the simplified equation surrounded by the red line instead of the ( if function) , how i can make it work?thanks.

Hi,    Why does thingworx choose Ignite as the distributed cache solution instead of  Redis ?   is there any special  consideration ?    Regards, Sean

I have obtained CAD Creo4 data. So, I tried to open the data with our CAD Creo2 (M200), but it couldn't be opened.In this case, what should I do to open it with CAD Creo2?

\   How should I start this drawing  

This is not working for Visibility permissions. Can you guide me on how to check that easily?   RE: post. This is a question following an idea thread.

Hi Developers, I have a mashup with lots of containers and widgets. I am currently using it as a homepage in Organisation. But it cannot be used as a master in mashups as ThingWorx won't allow that.I have been asked to copy entire contents of mashup into a new master mashup so that we can use it in mashups as a master.Its very time consuming. Is there a way to make a mashup a master or a way to reference mashup into master? Any suggestions will be appreciated. Thanks in Advance. 

Hello, trying to install version Mathcad 8.0 but if double klick the setup.exe file it shows that something is loading, but at the end nothing happens. Then tried to install from the .msi file, it downloads some tools but at the end it doesn't work either. Funny things is that the Mathcad 7.0 Version Installation works.So whats the problem? idk

REQUEST TO GET LICENSE KEY FOR MATCHCAD PRIME 2.0

Hi,As per the prerequisites of Thingworx Navigate, Thingworx Flow need to be installed. So, Can Thingworx Flow be installed on a Linux Server? I went through the docs and found no installer for the Linux OS.Thanks,  

How to modify the existing thingworx Extension and build in JAVA      

I created 16 decals, all using the same method. One of the decals will not appear on the model. I get a blank placeholder as though it is there, but no image on it. All the others worked fine. 

I want to know how to open this editor it is about Automatic Representations ( ver. CREO 9.0 )  

hello. I am trying to make a combo box with multi choices of various equations depending on defined variables, the attached file will explain it very well.how can I make it work?thanks, 

Hello  I am faily new to creo  i am using creo 7   I have an assembly and have defined a custom coordinate system origin in the assembly file   i am trying to get the center of gravity of a part in the assembly with respect to my "assembly" custom CS   What i am seeing is: 1) i can only open the part and get the CS of the part with respect to a CS "inside" the part file. or 2) i can get the CG of the whole assembly with respect to a custom CS.   both options are not what i need i need the CG of a part in an assembly with respect to a custom "assembly" CS any help would be greatly appreciated.  thanks       

Hello, I have a use case where I want to use the auto complete widget.However when implemented, it seems to not work correctly, or at least not all the time. The following is a search I've made setting the "MinimumLength" property to 1:As you can see, I get some values. But as soon as I add one more character, I get no results: This doesn't always happen as you can see here: So it doesn't seem to be because of the amount of text. If anyone has had similar experiences and have found a fix for it, or that could confirm that this is some issue with the widget, that'd be great. This way I can continue on with my work. Thanks,Jens 

Hi all, it's possible create two differents SBOm starting by one EBOM? The idea is to use for one of them the options "New Downstream Part" and fort he other one "New Downstream View".Thanks      

In the attached Prime 8 file I'm trying to solve a problem I have invented in my head.  I have 2 metal plates, one is fixed and the other is moving toward the other very rapidly (e.g. 1000 mph).  The voltage between them varies sinusoidally at 60 Hz.  The air between the plates is assumed to breakdown at 3 kV/mm.   I want to vary the phase angle of the applied voltage and find the phase angle that results in the maximum voltage stress across the air in the gap.  But, I'm not sure how to find that maximum in MCAD.    

Using Mathcad 3.1 under Windows 10.  Mathcad refuses to plot a two-variable function even though it will plot the same one-variable function with the other variable fixed.  "Cannot plot this function. It must evaluate to real values."  What is going on?  (File attached) 

Can someone please explain how the right side (RHS) of the equation below represents active power (P)?                       Explain P: = PFUL*MVA + (MVA - PFUL*MVA) *i/N   given N = 2000, and I run from zero to N.        

Is PTC planning to offer in future versions of Prime backward compatibility with files created with Matcad 15?     

Hello I am faily new to creo i am using creo 7 I have an assembly and have defined a custom coordinate system origin in the assembly file i am trying to get the center of gravity of a part in the assembly with respect to my "assembly" custom CS What i am seeing is:1) i can only open the part and get the CS of the part with respect to a CS "inside" the part file.or2) i can get the CG of the whole assembly with respect to a custom CS. both options are not what i needi need the CG of a part in an assembly with respect to a custom "assembly" CSany help would be greatly appreciated. thanks 

I am in the process of testing revaulting in Windchill 11.1 m020 cps28.  I started on cps08 and there was no Cancel button.  So I upgraded my different Windchill servers to cps28.  The first one I tested the revaulting with, the Cancel button showed up.  With the second one, the Cancel button is still missing.  I have tried clearing my browser cache and different browsers but no fortune.  Anybody have any ideas?  I opened a tech support case but it is out of date. Thanks, Brian

In attached file I'm trying to plot a function of time but am getting a "Replace complex values and NaNs by real numbers".  If I include units in my "t" range definition I can plot my second function.  If I exclude units I can plot my first function.  But not both at same time.  I can't see what is wrong.   

Certain bends of a sheet metal part will take different angles depending on if it is pre or post installation. I want to model and draw both states.  I don't want a family table as this will create two part models when in reality there is only one part. I tried simplified reps. I modeled the pre-installed state, then an 'unbend' feature, then add new bend features to set the installed angles. I planned to use simp reps to enable/disable these features as required. However, I'm unable to add new bends in the same location as unbent ones. Any ideas how I could tackle this would be appreciated. 

Hi,  I would like to make a new subassembly in the end of my model tree of top assembly. And I want to copy some of the components from top assembly to that new subassembly (just to pick the components I need to run some analysis) and than exlude it from top assembly. The top assembly is really big almost 2000 components and my current steps look like this: - Hide the components I dont need- Choose part filter - Choose all the components I can see (components I need)- And right click and Copy - Paste into new subassembly  But the problem is that I cant copy all the components (or dont know the way how to do that), but only one and its really non effective way ?  Do you know how to do that more effective ?  Thanks