Solved

Is there a way to print or export general information shown in the tables within Windchill? For example, I have a Change Notice within Windchill and I want to print the comments information shown within the Process Status Table.

Hi Team,   The Y axis of line chart in ThingWorx 9.2 is not auto-scaling even Y axis maximum is set on Auto.   The use case is that we need to autoscale the y axis as per the referenceline1value property of line chart. Actually when the value of reference line is either less than or greater than the values displaying on Y-axis of graph then it is not visible as the Y-axis is not auto-scaling with respect to the referenceline1value property.   Thanks in advance.

Hi, How to rotate a model along the Z axis like in CAD applications? Model created is having axis of rotation outside the model. I am using slider to rotate the model.  --Dhinesh

Hello everyone.   I will appreciate if the following topics will be answered: - How do I define the number of cells across the gap in Creo Simulate? i.e how do I manage necessary number of cells through the thickness of the modell? - Do we have an example or manual explaining meshing in Creo Simulate? - Is it possible to perform submodelling in Creo Simulate?  - How good Creo Simulate is compared to Ansys Mechanical Workbench?   Thanks in andvance.   Best, Sergey  

Hello, I am working with ptsctabset witdget on TWX 9.0. I would like to have tabs on the bottom spreaded to whole widget width. For that I need use custom CSS to disable not needed parts - back-button, forward-button and ptcs-dropdown part.Unfortunatelly, I am struggling to use correct selectors. Could anyone please help me with it? Thank you.

A hare from point 0 needs to cross a field with a length Δ and with two parallel straight edges as quickly as possible. The hare runs in a straight line perpendicular to the starting edge of the field and comes across the edge of a round section (point 1) where the hare can run faster (this round section of radius r is in the middle of the field). The hare changes direction of running, crosses a round section along a chord, runs out of it with a change of direction (point 2) and finishes along the shortest path (point 3). Determine the hare's running trajectory.  Why is the Snell's law fulfilled at point 2, but not at point 1? Where is my mistake or misunderstanding of physics (Fermat's principle)? See please the picture and the Prime 6 sheet in attach. See too The problem of cockroach races - PTC Community  

Hi everyone! I am new on thingworx platform. I want to Design a page where it takes inputs -sender email ID, Recipient email ID, Message body and a Button to send and when user clicks on send button, text available in message body sent to recipient mail ID from sender email ID. How can i do this? 

In my company, we use a library of files, which are included in our projects. These files can be for example datasheets of components, formulas out of toolboxes and so on. If we open a project file we encounter very often the problem that include files are marked red, meaning Mathcad reports an error with the file. The fact is, that there is no error in the file:We found a workaround for this, but this takes a lot of time. When you edit the path, you can force MathCad to reread the file and the error is gone. This has to be done for all marked files. Sometimes even this does not work. Then you have to open the corresponding file, recalculate and store it again.As we have include files, which include other files, this can get very very nasty. I reported this already more than 2 years ago, but no reaction. Now this problem got even worse. As the network path changed, MathCad hanged or got extremely slow (hours !), when opening a file with include file paths still on the old, not anymore

Question as per attached Prime 7Thanks 

I am giving an output of the Textbox and the Dropdown to a Service, based on the input the operations are performed in the service.Issue: How Can I know if there is nothing entered in the Textbox or Dropdown. if(Textbox==="" || Dropdown === "") { //Do Nothing } else { //Do Operations } But always the it's going in to the if condition only. How Can I check if the INPUT of the Widgets(Textbox and Dropdown) is Empty(no input given) or not  

Hi,Querying database and value stream taking long time to respond.Below is the example of querying database that co0ntains 62 entries. Taking 7.13s to respond. The server was working fine 2 days ago. Within milliseconds services were responding.Because of delay in querying all the services throwing timeout error and failed error.  Following steps are already considered:Disabled a scheduler that was queueing up threads (Created 10 days ago)Restarted ThingWorx foundation and databaseApplication logs does not have any data related to it.There were no code changes done in past 5 days Script Timeout increased to 3600sCPU , Disk and Memory status looks fine System Details: Application : ThingWorx Foundation - 9.1.0Operating System: CentOS Linux 7 (Core)Database : PostgresDB Memory, CPU , Diskspace:ThingWorx server:8008648 K total memory2697844 K used memory3781920 K active memory1199188 K inactive memory2507472 K free memory82700 K buffer memory2720632 K swap ca

Hi,When result =  new Date() is executed, the result Time format is in IST, but as per the customer point of view it should be in UTC, how can it be done ?Note: the output of the service should be DATETIME@paic @slangley @c_lowy Thanks,Shashi

Hi,The Service(has datashape to) is binded to the Advanced Gird and can see the data in the Advance Grid, but when pressed on the Configure Grid Columns, it Says "Must be bound to data", not able to configure the columnsThingworx version is 9.2@paic @slangley @c_lowy Thanks,Shashi.

Hi,How to convert the UTC Date Time to CDT in thingworx ?@paic @c_lowy @slangley Thanks,Shashi

HiInstalled KepServerEX on the Azure VM, and KepServerEX is by default configured with an opc ua Configuration on local host, can this OPC UA Configuration of the KepServerEX can be Connected with the OPC UA Client Connectors ? @paic @slangley @c_lowy  Thanks,Shashi.

Hey guys!This is my first time posting something but now I'm getting an error that I've never had (It has worked before). Once I create a master mashup, configure my menu and identify the mashups related to this menu and the master mashup, I try to see the functionality, but I only get a grey screen. When looking at the log, I get a "null" value for the mashup I try to see (log.png). Do you know why I get this message? Thanks for your help!

Hi, I converted a Mathcad 15 file to Prime and most of the results are different. These differences are due to the way in which Mathcad 15 and Prime append vectors vertically (see image). The solution I found was to transpose the matrix in Prime (see AzD_(j,jw) in image). Unfortunately for this particular Mathcad 15 file, there are several matrices that have the same issue and I would have to transpose each one of them individually. I wonder if there is a way to automatically change all the matrices in Prime that have this issue. I tried changing the range of (j,jw) without success. P.S. I attached a Prime and Mathcad file exemplifying the issue. Thank you!

Hello everyone I have been a bit puzzled by the error I get when using find with vector variables. I have defined a triangle DEF in 2 dimensions. I am searching for the coordinates of a 4th point S such that the sum of vectors from S to the other points is a zero vector (weighed with parameters g and t). Unfortunately, find does not find a solution.I thought maybe it was due to a divide by zero error, but adding the constraint that the product of the norms must be strictly positive does not solve the problem. The initial guess is already fairly close to the solution, so I don't believe it is the issue.I have attached the mcdx file as well as a screenshot for convenience. Any idea of what is going wrong ?  François 

Hello, ProGroup t_Group;ProLocalGroupCreate((ProSolid)asm_mdl,feat_id,num_refs,L"COMPONENTS_TOP",&t_Group); I have something like this, asm_mdl is an assembly with many part components in, feat_id is an array (feature id) of some (not all) components part inside the assembly, num_refs is the size of the array. When I run it, a confirmation window opens and says "Group all features in between YES or NO".When Yes, it creates a Group with all components in the assembly.When No, nothing happens. My problem is that I want to group only some part component (the id I have putted in the array) not all.Another problem, when I create two groups sequentially, the second group is created inside the first group. How can I avoid it? Thank you guys! @MichelH @YaroslavSin @rghadge @RPN 

I want to change the thickness of the detail view line. @MartinHanak .this the detailed view.and this is how it look in the pdf.and I want to make the marked curve thinner than the drawing

Hi , I am trying to get the cache method for a remotely bound  property using service. I managed to get all the remote bindings in the composer via service but cant seem to fetch the cache method. If  someone has an insight on this please let me know.@paic  

Hello, Right, mathcad and trig do not seem to be living a harmonious lifestyle. I ask why? I'm going through some fairly basic questions for an assignment for school and again on paper everything is rosy, but then mathcad is unconvinced. I am seeming unable to input the inverse trig functions in any form which I know (sin^-1, asin) and then as you can see in question 8 in the file attached the answer is absolutely wrong. What's the issue?! Is it me? Admittedly quite possible but I think I have tried all of the obvious approaches but I am likely wrong. thank you in advance for any help which you can offer me! Much MathCad love,Rowan 

Hello Everyone,   I have a problem of sweeping. When I choose the option 'solid', the option material removal is activated by default and I had no way to change that. I use Creo parametric 6.0 for students. Could you help me please? Regards,    

Hello all, several days ago, I've updated my MathCad version to Prime 7.0.0.0.However, now I'm facing problems with my old scripts as it seems that the new version is not able to simplify as good as the old version. For example:   Obviously, the equation is 0 if test is a real number.Also, the equation was simplified to 0 in the old version. Even if I set test = 1, it is not simplified: Is there any possibility to improve this new behavior?Or is a different semantic required in the new version? Thanks in advance and best regards!

I am using Creo Parametric 7.0 7.0.3.0When I print the main wiev of a welded assembly in creo parametric, it prints all the welding symbols even if they are hidden. How do I print just the assembly without the symbols?