Solved

Hello All,I am looking a solution inside workflow for getting the iba vaues of wtpart to wtdocument.An example, i have a document and this document connected to wtpart by described by document.I have an iba at wtpart called "MATERIAL" and i have an iba also for wtdocument called "MALZEME".So i try to set MALZEME on wtdocument by getting to value of MATERIAL on the wtpart.Ho we can establish this programatically inside workflow.Thank you for your assistance.

Version: Windchill 12.1 Use Case: I have a Creo assembly and want to associate it with an article using the 'Owner Link' type, but this option is not shown.Description: Cant activate Owner-Association.

How do I copy paste large data in first column of combo box? Rest columns I am able to copy paste the data but first column how to do that? 

I have three stacked blocks with widths denoted as B1, B2, and B3. Each block is 4 feet high, and the bottom elevation of the lowest block is defined by BotEL.The ground surface is represented by a set of known points with X and Y coordinates describing its sloping geometry.For each block, I need to determine the coordinates of two intersection points with the ground surface. These are labeled a1 and b1 for the first block, a2 and b2 for the second, and so on.The "a" points correspond to the vertical lines at the right edge of each block, where the X-coordinate aligns with the block’s right edge. The corresponding Y-coordinate must be interpolated from the ground profile at that X-location, The "b" points correspond to lines forming an angle θ (theta) with the ground as shown. A Mathcad and an image illustrating the problem are attached.I appreciate any help!

Buen dia comunidad, tengo un problema en la iteracion para encontrar un valor (Xcal) donde la condicion es que el valor calculado menos el dato del valor inicial sea cero (Xo = Xcal) o el error sea minimo. Por favor si alguien me pueda ayudar se lo agradeceria. Gracias por la atencion prestada. La version de Mathcad Prime 9.0.0  

I do see a file present in windchill_home/codebase/LogicalAttributesSite.xmlWhat can be configured using LogicalAttributesSite.xml file?

Hello everyone,eff.K shown in picture is radius of curvature along beam length and X is the array for sectional points.I have to double integrate eff.K to get deflection. How can i do it in Mathcad? Attached Mathcad 10 sheet.  

I would like to write a program to create a nested array. I have a column vector containing angle values. I want to iterate through this vector and create an array of arrays with each element being [cos(angle) sin(angle)]. I am sure this is not difficult, but the syntax is not clear to me at present. I think I have been writing python programs for too long.Thanks in advance for any help

I am trying to reinstall MATHCAD 15 (JA150006E3006-Q3PF-8VYW)on a new WINDOWS 11 computer. The installation fails by telling me that MSXML 4.0 SP2 is required. The link provided is dead and Microsoft tells me that MSXML 4.0 SP2 is no longer available.What should I do?Best regards,Rich

Hi all, Does anyone know if using legacy widgets could cause mashup performance issues or crashing? I have an old mashup that hasn't had its legacy widgets migrated fully that continues to crash randomly. Would this be a possible reason for crashing, with this message below? The only reason I haven't migrated is because this mashup visually gets changed significantly from the legacy widgets to new implementations, but I can't seem to narrow a separate reason that the crashing occurs and don't have the issue on any other similar mashups with new widgets. Thanks for any input!  

From the PTC Software Download page I can only see ThingWorx 9.3-9.5, but not any other versions like 9.6-9.7.  Why is that?

Hi ,In WC12 for every resulting object the default target state is blank How we can able to remove that or Is there any way to disable it? @HelesicPetr 

Version: Windchill 12.0 Use Case: I have a use case where a supplier role should not see what security labels are used. When I tried to give the supplier user only the Windchill Base (Does not have Security Label / IP Protection license), still that user can see that wizard step of "Set Security Label". I also did not find a Profile action for "Set Security Label", we only have "Edit Security Label"Description: I have a use case where a supplier role should not see what security labels are used.When I tried to give the supplier user only the Windchill Base (Does not have Security Label / IP Protection license),still that user can see that wizard step of "Set Security Label".I also did not find a Profile action for "Set Security Label", we only have "Edit Security Label" Need a suitable solution approach

We are getting lots of tag from PLC devices (40+) to Kepware. Sometimes, due to some reason the connectivity is lost  between PLC and Kepware. So that we facing data loss issue. Is there any mechanism within a Kepware to address this connectivity loss? How to identify this connectivity loss from ThingWorx for all PLC devices?

 Hi everyone,I’m working on a UI feature in ThingWorx Mashup and was wondering if something like the following is possible:👉 I have a layout where a picture (or model view) is shown on one side, and I want to dynamically change its size based on how I drag a divider or a panel.When I drag the divider to the left (making the picture area larger), the image or 3D model should grow (scale up).When I drag it to the right (making the area smaller), it should shrink accordingly.The idea is to simulate a sort of "zoom effect" by using the container resizing rather than zooming through buttons or manual controls.📷 Here's a screenshot for visual context:(Attached image showing the mashup and panel layout with the drag area)Has anyone tried implementing something like this before?Is it possible to bind the widget size or scaling dynamically to container resizing in ThingWorx?Or is there a workaround with CSS or JS injection?Any ideas or tips would be greatly appreciated!Thanks in advance!

I am using ThingWorx Platform Release 9.7 and DatecodeF000The new Collection widget behaves differently compared to the legacy version. When the data connected to the Collections widget is refreshed, the entire widget reloads, creating a disruptive effect. In contrast, the legacy Collection widget does not exhibit this behavior. I have confirmed that the configuration is identical for both widgets in my cases.To clarify, the data is properly connected to the widget. One of the data fields is selected as the UIDField parameter, and data is pushed to the cell via the MashupPropertyBinding configuration. However, when the data source is updated (e.g., through auto-refresh), the entire Collections widget reloads instead of just updating the data within the cells.A workaround is to bind data directly in the cell mashup, but this approach is performance-intensive and not considered best practice.

Hello We are using KEPServerEX 6.17.240. We are trying to diagnose an issue with frequent disconnects between a Siemens PLC and KEPWare, communicating over OPCUA. We are looking at the OPC Diagnostic log from View -> OPC Diagnostic and I am looking for any documentation for how to interpret these events.   For example, we are continually getting these "ServerFaultResponses" (which are timeouts associated with a previous "PublishRequest". But there's really no documentation I can find to help interpret these. Some of the other logs have an actual program name in the brackets, where as this example has a seemingly random number. Is there a way to associate this number with a process? Is this number generated somehow by KEPWare or something like a ClientID from the actual OPC Client application?I'm basically looking for extra information about what some information in these logs mean, specifically for helping to interpret why we are flooded with timeouts and th

Hallo Community,ich stehe derzeit vor einem Problem und ich komme wirklich nicht mehr weiter. Ich möchte einen ergonomischen Fahrradgriff für ein studentisches Projekt konstruieren, der am Ende mittels 3D-Druck gefertigt werden soll. Ich habe ein Teil der Auflagefläche herausextrudiert, um später ein weicheres Material (evtl. TPU) entweder über 2 Komponentendruck oder durch mechanisches Fügen in einem extra Schritt auf die Fläche aufzubringen. Die Schritte dafür waren Versatz --> Profil --> Zusammenführen --> Verbundvolumen (Bem.: Das Modell besitzt Freiformflächen). Für die Auflagefläche benötige ich wiederum das zuvor herausextrudierte Volumen, das ich dann ggf. auch anpassen kann. Ich bin zunächst gleich vorgegangen und am Ende wollte ich mit beim Verbundvolumen Material auffüllen, was zu einer Fehlermeldung führte. Dann habe ich jeweils die untere und obere Skizzengeometrie auf die Fläche durch Zusammenführen erstellt. Wie bekomme ich jetzt ein Volumen aus diesen Flächen?

Hello! With reference to this topic i have talked with MAzak and in the new versions of the controller you can activate the CVARs, but the problem so far is y only can see the System and assets which at least in kepware we do not see the tool life/ Cvars Value, i can only see those in the XML locally

Hello, i'd like to remove Plans from Product -> Plans -> PlanI have not possibility to delete. How can i do it?   

Hi Community, Creo version in use 11.0.2.0 connected to Windchill 12.1.2.10 Does anyone here know a way to define a reference designator for a component used in a subassembly in the upper Assembly?Our use case:A - Top Assembly,  B - Subassembly (Gathering Part)    C - Component with an electrical designation e.g. R101  B - Subassembly (Gathering Part)    C - Component with an electrical designation e.g. R102 Subassembly B is used several times within A, but it's actually just a "dummy" assembly which only exists in MCAD. When we now assign a reference designator for C, it is defined in B, hence it's always the same, but it should differ. Is there anything foreseen in Creo / Windchill to cover this? Follow up question would be if it's somehow possible that component C immediately appears in the WT-Part structure of A without generating a Part for B? Thanks and BR

We have Thingworx Navigate platform where we have deployed 5 apps. We are using Windchill authentication for logging into Thingworx platform. There are two apps which requires manual access and rest of the apps are available for all the users.We are facing issue when user tries to login with different combinations of uppercase and lower case letters which in turns create 5 different username in Thingworx platform. Windchill does not have this issue. What are the ways we can prevent these situation.

Hi all, Looking for more information on the service mentioned in the description. Mainly more information or examples on formatting for the inputs of the service as the descriptions seem limited for someone without experience on using the Analytics functions of Thingworx. Thank you! 

Hello, When I run my edge, everything works fine. However, I notice a message keep showing periodically: INFO com.thingworx.communications.client.TwApiWrapper - api_requesthandler: No handler found. Returning 404 My device works fine, and I am able to run and control my remote properties and services.Is there an explanation why i have this message ? Can I remove it ? -.NET Edge 5.9 with .NET8-Thingworx 9.5.1

I might not be doing things proper but trying to learn and do an upgrade in place (kind of) of Navigate while upgrading Windchill. Goal is to get to 9.7 and WC 13.0.2.  I have a clone on my test Navigate system and my upgrade target Windchill at 13.02. DB is SQLServer if that matters for Navigate. Thingworx appears to function and I can authenticate (which is to Windchill). I can see main page and Composer. I made sure all of the Odata connectors, integration connectors and proxy connectors map to the new temp hostname (-upgrade for my rehearsal 1). At the current time, I have not upgraded Navigate since I wanted to validate its functioning properly first. I have some custom apps which their own Odata connections and they seem to function fine. Its just the OOTB navigate apps that do not work. If it just as simple a running upgrade to bring it to 9.7 which would be supported with 13.02,  I can do that but its a one way street. If something else was wrong or it should work as