Solved

Hello, I am not able to unlock protoolkit and getting error message. error attached here.Is this need separate license or Creo license is enough to unlock?

Version: Windchill 12.1 Use Case: I want to have an Indicator in EBOM which informs if the EBOM was created completely from CADBOM (using auto associate or edit associate actions in workspace) & it should also allow me to understand if EBOM was created manually and then linked to CADBOM.Description: We have a situation that quality of the current EBOM is by far better than that of the 3D model. When someone want to Sync changes from CADBOM to EBOMs, then people should understand that EBOM was not created from CADBOM and thereby have a more detailed/critical look on these EBOMs in particular.

Hi,We have MathCad Prime license. Please help me find the Mathcad Prime version 10 to download.Kind regards,Xiaojiang

Version: Windchill 12.1 Use Case: How to use the PTC.ProdMgmt.GetBOM with the POSTMAN App?Description: Hello community, In my case i want to fetch some data from my BOM (in the picture) so i need to fill the parametersI've used the PartID from the first picture in the URL, the CSRF NONCE i got from this Link http://<Windchill HOME>/Windchill/servlet/odata/PTC/GetCSRFToken() and copied the code  in the CSRF_NONCE Fieldi am not sure what to type in the body can I let it emty?when I click Execute i get the Link with error code 400 Thanks in advance 

Version: Windchill 12.1 Use Case: I wanted to check if someone have implemented Windchill Partslink with Electrical parts and how was the experience ?Description: Can Windchill be used as a catalogue management tool? Does anyone have sample classification structures ? what were the challenges faced or any shortcomings of the tool based on your experience?

I recently updated the scheduler time in our development environment, but the changes have not been reflected in the production environment. What is the reason this ?How can I track the issue.

I am using ThingWorx Platform Release 7.1 and DatecodeF000We see an issue in the Powerpack Management Screen for SMOM 1.0 USCOA071 server.It does not show the entire data. It will limit the data shown on the screen in a range of 500.We need the entire data to be displayed on the screen for the provided start and end times.

Hi Guys,I used the below method to get the "Described by" document name in the WT Part search tab. I would like to have the same for the associated CAD/Dynamic document linked with the drawing. WTDocumentInfoDescribedBy2 with mapping describes@wt.part.WTPartDescribeLink~describedBy^wt.doc.WTDocument~name (to get name of Described Document)Regards,AJ

Cannot open native: SW2022*.sldprt, *.sldasm files in Creo9 - keeps showing error:'M059183C001.SLDPRT' cannot be opened because it was previously opened using newer release of Creo.'M047886C001.SLDASM' cannot be opened because it was previously opened using newer release of Creo. We were able to do this in the past with no issues We are using: Windchill 12.0.2.7, SW2022, Creo9, WWGM13.02.1 any ideas on what might have caused these files to not open now in Creo9?seems to be a  Windchill issue?  thanksRich 

Can WTPart numbers be built by choosing values from several enumerated lists and adding the values together to create one final part number? 60SSMMM-ZZZR60 is the root number for MaterialS is the shape of the material as supplied (01= round, 02=hex, etc.)M is the material code (030=ams qq-s-763, 022 = ams qq-a-225, etc.)Z is the size( 3 digit integer)R is the random or sequential number (one digit integer)   

IFX in Creo 10.0.4.0When using IFX it standard creates holes in modifiable parts. When you don't want that you have to set it manually each time to "Do not create a hole".Is it possible to have it default always set to "Do not create a hole"  for all parts? 

Good mornig,I tried to use this code on WNC 12.1, replacing LWCNormalizedObject (deprecated) with PersistableAdapter: private static void setIbaOnPartUsesOccurrence(PartUsesOccurrence puo, String ibaName, String ibaValue) throws WTException {System.out.println("--------- Import.setIBAonPartUsesOccurrenc invoked on occurrence "+ puo.getName() +", with ibaName=" + ibaName + " and ibaValue=" + ibaValue);wt.occurrence.UsesOccurrenceUserIBAs iba=wt.occurrence.UsesOccurrenceUserIBAs.newUsesOccurrenceUserIBAs(puo);com.ptc.core.lwc.server.PersistableAdapter obj = new com.ptc.core.lwc.server.PersistableAdapter(iba,null,java.util.Locale.US,new com.ptc.core.meta.common.UpdateOperationIdentifier());obj.load(ibaName);obj.set(ibaName,ibaValue);obj.apply();wt.fc.collections.WTKeyedMap usesOccurrencesAndData = new wt.fc.collections.WTKeyedHashMap();wt.fc.collections.WTCollection relatedUsesOccurrenceData = new wt.fc.collections.WTArrayList(); relatedUsesOccurrenceData.add(iba);usesOccurrencesAndD

I have a problem with the mouse in the mould base definition window, when I place the mouse over a plate it does not select to select it I have to move it either to the side or higher up,has anyone ever had this problem? if so how did you solve it?i have also tried with older versions but always the same problem.

I wanted to check if the following workflow is possible using Creo and Mathcad, and whether any customization is needed.Use Case:Let’s say I am designing a pressure vessel, where key parameters such as diameter, height, and thickness are determined through design calculations.Now, the thickness is calculated based on a formula in Mathcad, and I do not need to create a 3D model of the pressure vessel. Instead, my goal is to directly generate a 2D drawing in Creo, where dimensions like thickness, height, and diameter are taken from a linked Mathcad worksheet.My questions are:Is it possible to use output variables from a Mathcad sheet directly inside a Creo 2D drawing to control dimensions?Can this be done without creating a 3D model?Does this workflow require any customization or special setup?If it’s possible, could you please guide me on how to link Mathcad with a drawing and control the values dynamically?This workflow is quite relevant for many industries (especially pressure vessel

Hi,   I have installed the PTC Creo late February. Now, when I try to use it I get the message shown in the picture below:   What is wrong? I do not get it. It looks like the PTC license has been cut.........   Any thoughts?   Thank you!

Does anyone know the runtime for the SetRemotePropertyBinding service in ThingWorx and if calling it a lot of times in a single service to automatically bind many properties will cause slow runtime or timeout issues? My team is trying to bind between 1000-2000 properties for a machine in a single service call and the service takes incredibly long to run, sometimes will reach the 20-minute service timeout limit, and I am trying to rule out if this service could cause that issue if ran a lot. Thanks! Version 9.3.17

Hello all,export tracker to word using eg. default system template works fine and data are visible.But it does not work if Merge Field is edited: 1) { MERGEFIELD  author \* MERGEFORMAT }  -> author is rewritten manuallyor2) { MERGEFIELD  author \* MERGEFORMAT }  to { MERGEFIELD  baseline \* MERGEFORMAT } or manually inserted : Insert tab > Text > Quick parts > Field > Merge field If working Merged Field is copy/past then it works. Is there any special formatting or syntax needed for working with Merged Fields in Word document?thank you 

Hello,I'm looking for a solution to retrieve data from an Omron NJ101-9000 controller and insert it into a MySQL server. I decided to test Kepware (KEPServerEX) to see if it can be used for this project.So far, things are looking good — I downloaded the trial version of Kepserver, successfully scanned the controller's tags, and connected to the MySQL database via ODBC. Everything seems to be working, but I've encountered one issue.The problem is that the data is being written to the database as shown in the 1 figure, even though I'm using the "Always Triggered" mode with a 5000 ms interval.What I want is for the data to be written to the database like it's shown in the 2 figure. 1 Figure.2 figure The second option is the most suitable for me because the data will be read by Grafana.So, could you please advise me on how to write data to the database in the way shown in the second example?If I manage to get this working, I would be able to submit a request to the purchasing dep

Hello Everyone, I need to update the verification status of each instance in the family table using the Windchill API.I am currently able to update the attributes of both the generic and instance entities using the following API:EPMWorkspaceHelper.manager.setAttributes(ws, epmAttributeMap);Has anyone worked on this before or have any insights on how to proceed?  

I want to keep EI as EI in my calculations, as EI was defined previously. wondering if I can do that, and then I also want to extract 0.5 values out, because these are my Distribution factors. so I want to be able to type DF_BA = 0.5. 

Good Morning, Community,Would anybody be kind enough to help me on how to create a table in Mathcad Prime 8. Please see below.Thank You, Boyer

Hello, Very new to the software which I plan to use as a worksheet for exercises, so the following may be requiring a very simple solution.I am using Mathcad Prime 9.0.0.0. I am trying to solve an equation both symbolically and numerically (?):I don't seem to be able to get a result and I also don't seem to be able to use = instead of :=. Any help?Thanks!

I am using Windchill PDMLink Release 12.1 and Datecode with CPS 12.1.2.0We need to intercept the checkin event of a wtpart when the user does the following operations: checks out a wtpart, modifies only its structure links (or adds documents) and checks it in without changing its attributes.

I was trying trigonometric functions in Mathcad & for some reason I couldn`t get these results/values in fraction mode. Is there a way to enable them? I couldn`t get it in Math Formatting Tab as well. Please feel free to share your thoughts.- Srikar

Version: Windchill 12.0 Use Case: I created a query builder report for reporting duration of workflow processes in a container. The result looks like this: WF Name | Business Obj Reference 1 | Actual Start | Actual Finish | Context (containerName) | Duration (days)Part Release Workflow/0000269655 | VR:wt.part.WTPart:1089377814 | 2021-04-16 08:34 CEST | 2021-04-19 08:13 CEST | DRG9016 | 2.99 I would want to extend the report with WTPart information like "Name".Description:  There seems to be no usable "join" between the tables.I am assuming that i must match business object reference with WTPart "branch identifier",However: business object reference is a string like "VR:wt.part.WTPart:1089377814" and branch identifier is an integer like "1089377814" from above. I tried to define additional "Criteria" matching these two attributes, but I cannot get the match correct.How can I configure the query builder to fetch the name of the WTPart?