Solved

Dear AllI'm working with Pro-mechanica wildfire 4 and O want to calculate the flexion of a shaft according to is own massplease can you give me the method to follow ( or better a tutorial )Many thanks for your helpOlivier

Hey,   i am working with creo parametric M020 and i am trying to edit the BOM Balloons, but somehow i can't change them to take a custom bom.sym.   I tried the following command:   any ideas?   greetz samThis thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

Hello,I want the frequency response of F(s,Iabc).I don't see why that don't to display.Do you can to help me.Thank you very much

I want to make a workflow that has multiple approvers in the same role. If all of the approvers have a vote of approved, the primary business object will be approved. If there is 1 vote to reject, the primary business object is rejected without allowing the remaining voters a chance to vote. The problem is, when a reject vote is counted, the workflow waits until it has the rest of the votes in. This is not a good use of time since it will ultimately be rejected regardless of the rest of the votes. Is there any workflow logic that I am missing that would allow me to do this?All votes approved -> Approved after all votes1 or move vote rejected -> Rejected on the first Rejected voteThanks!

Hello everybodyI want to plot the Ci(x) function.Cosine integral function.I did it by a way but I don't like it.

Is there an option to have the Mathcad 15 Help Window remaining on top while working on a sheet?Thank you.

Hi,I'm designing some parts for a robotic arm for my students to make.When I convert the part to a drawing to convert to DXF, The scale of some of the drawings come out as 2:1 others come out as 1:1.When I export them into other software to cut them out on a Roland engraver, some come out twice the size.How do I change the scale of the Drawings from 2:1 to 1:1?This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

Anyone know where the good old "axis point" from the sketcher menu has moved to?This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

I have some points as part of a datum curve. I want to rename the points individually, but since the individual points are not separate features, it seems I can't rename them.Again, something that would take me 2 seconds to do in WF4 has resulted in hours of frustration and wasted time.....with no solution.Is this an "enhancement" like taking away the "Add Inner Fcs" option in a swept protrusion? Am I supposed to fix this somehow with a "Fill" feature too?Why must I be forced to completely relearn Pro/E with these "nothing but" GUI changes? I'm wasting far too much time trying to find stuff I used to easily find in WF4. And the "Help" isn't.....This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community me

Hello, everyone!I wonder why Cre misrepresents a model of a fan guard in a shaded with edges mode.The only way to see it correctly without any distortions is to switch from the shaded with edges mode to the wireframe mode.In the other modes Creo exchanges circles for polygons.Thank you in advance.Best regards, Vladimir.

When we install arbortext editor we have Documentum connect option available to connect to the webtop and similarly we can have PDMlink connection through arbortext editor. So my concern is can we have these two options available in arbortext editor at the same time? i.e. both menus should be present on menubar when we open arbortext editor.Is it possible??Please have a look at the attached mockup.ThanksNitu

I must not be clear about the usage of Minimize.Thought I had used it in similar fashion before and am wondering why it is not happy in the attached environment?Thank you.

Hello,It' my last error and i don't understand, it's very important for me.The eroor is on the graphics :PhaseofHH8(f16,tpas2,tm,sa) This function is undefined at one or more of the specified points.Something, can to help me, please.Thank's in advance.Olivier

Hi,I cant open CREO parametric (School Edition), i didnt get a message it just doesnt start...i tought it can be a Compatibility issue but i already check it and .. nothing happends.Please Help.Im using a Macbook Pro, but i have Windows 7 home premium on it.Thank you

hello, I have a filter centered on frequency 50KHz using the Dirac function and niche. I do not see how to delay the signal rep (n, t) of 50KHz, the result will be to put in reps2 (t) Can you help me? Attached file.Thank you very much

The "match" function returns a result in ( ).I would have liked to use the value returned by "match" as an index, but if I try to assign the "match" result to a variable, the variable is flagged as "undifined" when called further down the road."Help" is not much help on that.Is there a way to make usage of the (value) returned by "match", or can this function be used for informational purpose only?Thank you.

Is there a way to do this? I imported the iges and saved as a Pro part, but cannot seem to change units. Any help would be greatly appreciated!Thanks....and good morning! TGIF!This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

I ahve attached a worksheet which was passed by a fellow collab who has been struggling to create a new discussion, and could only manage to create a new blog (I know very kind of me).Please see the attached.Mike

Hello, everybody!Is it possible to copy a subassembly from one folder to another so as the parts, which it consist of, don't get suffix "_" at the end of their names?When I do it now I usually get these:Nut_M8Nut_M8_ Screw_M6Screw_M6_Washer_12Washer_12_and so on.Thank you in advance.Best regards, Vladimir.

Hello, I have an error that : all evaluations resulted in either an error or a complex resultDo you can to help me for to display the graphics ?Thank's

Hello all,I'm trying to minimize the error in a function and have started with what I know to be fairly optimal guess values (achieved by using known good values and help from the Excel solver although it seems fairly limited in what it can do). It doesn't seem to work very well though. If I change one of my initial guess values it doesn't optimize back to the original optimal value.Is it because I've set the problem up incorrectly or because the type of problem is not easily solved without further constraints etc. or something else I don't appreciate?The mathcad doc attached is set up in the initial optimized state. If you alter the first element of vector "TCa" or "TCb" slightly, you will see the error curve in the first set of plots worsen. However, I would expect the optimization to have a good go at getting back to the optimal state, but it doesn't seem to.I've tried to lay things out as neatly as possible but if there is any ambiguity please let me know,Any advice gratefully rece

Hi,When trying to create a drawing of my assembly model, I get these errors:Error: The saved view name FRONT does not exist in the model PIPE_WRENCH.ASM. The drawing view on page 1 could not be created.Error: The view on page 1 could not be created because the parent projection view was not created.Error: The view on page 1 could not be created because the parent projection view was not created.Could anyone please help me with these.Thanks This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

I have successfully downloaded Creo Parametric. All the icons on the toolbars appear to work but upon selecting sketch or anything the screen remains white, nothing is displayed. If I try to draw a line, the line is not visible on the screen. I have attached a print screen of what I can see.Any help would be much appreciated,-Sal

I'm interested in displaying multiple analysis features and their corresponding results in a table on a drawing. I'm attempting to create a composite table that displays not only the typical component data but also other informaiton we use for our manufacturing purposes (trim lengths, drill diameters, etc.). It's very possible I'll have multiple length analysis features, multiple diameter analysis features, etc. The analysis features will often be created referencing imported geometry. My question is this...how do I display in my table the details for each analysis feature? An ideal solution would be one that automatically updated as analysis features were added or deleted. Is this possible? I am not an expert in tables, relations, parameters, etc. so if you don't mind I'll need detailed answers.Thanks,DavidThis thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the

Hello,Can you tell me how to display Polar Circle on a H88 (f16, tm, faf1 [abcd) ? or how to display the values ​​ModuleofH81 50 (f16, tm, faf1) on a graph? and for PhaseofH811 (f16, tm, faf1) ? This is very important, thank you for your answers