Solved

Please help me what am i doing wrong?Mathcad Prime 11.0.1.0

Creo has neat functionality in the restricted parameter list.  Creo also has nice functionality in that you can import an .xml file to add parameters to a Model.  It would appear that these two do not play well together. I am trying to update legacy models that have missing parameters and my .xml import was working wonderfully until I updated my restricted parameter.lst file.   I get this message:   Is there any way to make the import work?  Is it a matter of my restrictions in my .lst not EXACTLY matching what I have in the .xml?

Hello,I need to transfer a Creo assembly file from Windchill Production to Windchill Test system.I have tried following methods:Method 1 : = Import Export From Site UtilitiesMethod 2: = Package Creation In the product containerMethod3 : = Workspace Import in Creo--------------------------------------------------Results:Method 1 : = Import Export From Site UtilitiesThis failing with the error “Nested exception is: wt.util.WTException: This is not expected. Multiple Objects exists with same master, number, version and view info!!!”Method 2: = Package Creation In the product containerThe package is not getting zipped. Referred article for the sameMethod 3: = Creo Workspace ImportThis creates ghost files and new file since there is family table in the assembly.--------------------------------------------------Please suggest easiest method for the export of CAD data from Production to test system.

I noted this before I left for vacation after I installed this patch for both my DEV and TEST environments. Things appeared ok for the most part except when viewing a Part Structure tab. Using WC 13.0.2.4 on RHEL 9. Behavior is you get a blank tab that never responds, just the spinning loading wheel. Other tabs and pages appear fine. No error messages appear in MS log. Not a browser cache issue as I cleared my cache 100%. Patch does recompile jars and js files so anything could happen. I need to verify it but I believe the cause is related to file permissions. I see the error in Apache logs. Just need to validate it before closing thread.

HiI am on Creo 10.0.9.0As detailed in the picture below, as I increase the value of the Transparency, opacity increases. Shouldn't it be named to Fill Opacity instead of Fill Transparency?Hope I am not missing anything.

Hello,I want to use Creo for simulations, but I can't access the simulation interface.The button under Application > Simulate is grayed out. The Flow and Mold Analysis buttons are both in color, even though I don’t have a license for Flow Analysis and can’t access the Flow environment.Is this due to the graphics card’s RAM, which is sufficient but not recommended or because the A400 isn't supported?Thank in advance The Hardware Check reports:Your hardware is not qualified for Creo Simulation LiveYour graphic card (GPU) is a supported NVIDIA CUDA based card. However GPU does not have enough video RAM to optimally support Creo Simulation Live.Creo Simulation Live relies on the latest graphics processing unit technology to provide its computation and visual experience and requires the following:A dedicated NVIDIA graphics processing unit card (Quadro recommended) based on the Kepler, Maxwell, or Pascal architecture. Most dedicated NVIDIA Graphics Processing Unit cards produced in 2013

Hi,I am using root function to solve a function for different variables (variables are vectors) but some of these values don’t converge as there is no solution. How can I skip these values that don’t converge and make a table for those values and solve the rest? I have attached the MathCAD zip file.  Thank you!!!

Getting failures applying this patch to my test environment on RHEL 9. Fails with following message:DEBUG 14-04-2026 13:21:37 - [java] java.lang.RuntimeException: Unable to write to byte cacheDEBUG 14-04-2026 13:21:37 - [java] at com.google.gwt.dev.util.DiskCache.writeByteArray(DiskCache.java:191)DEBUG 14-04-2026 13:21:37 - [java] at com.google.gwt.dev.javac.CompiledClass.<init>(CompiledClass.java:118)DEBUG 14-04-2026 13:21:37 - [java] at com.google.gwt.dev.javac.JdtCompiler$CompilerImpl.createCompiledClass(JdtCompiler.java:344)DEBUG 14-04-2026 13:21:37 - [java] at com.google.gwt.dev.javac.JdtCompiler$CompilerImpl.process(JdtCompiler.java:306)DEBUG 14-04-2026 13:21:37 - [java] at org.eclipse.jdt.internal.compiler.Compiler.processCompiledUnits(Compiler.java:575)DEBUG 14-04-2026 13:21:37 - [java] at org.eclipse.jdt.internal.compiler.Compiler.compile(Compiler.java:475)DEBUG 14-04-2026 13:21:37 - [java] at org.eclipse.jdt.internal.compiler.Compiler

Hello,I am trying to locate the "Windchill Implementation Practitioner" certification in PTC University, but I cannot find it in the certification catalog.I would like to understand how to access or register for this certification.Thank you in advance .

HiWe have more than 20,000 library parts, out of that 15,000 part successfully moved into windchill library folder .The remaining 5000 parts when I am moving to windchill from local drive, it is showing "CAD Part is not unique".Because of this issue , we were not able to upload the assembly .Windchill implementation team working on this issue last one month but still not able to find the root cause.Note:Those 5000 parts are not present anywhere inside windchill.

Let's say we have 3 different organizations: Apple, Banana and Cucumber.Each organization uses a different EPMDocument type. Apple uses the default "CAD Document" EPMDocument type.Banana has its own type called "Banana CAD Document". This is a subtype of CAD Document.Cucumber has its own type called "Cucumber CAD Document". This is a subtype of CAD Document. When uploading (& checking in) CAD objects from Creo Parametric to Windchill, the correct EPM Document type shall be used when creating the Windchill object. How can I do that?I know that you can do that with the UPLOAD_SOFT_TYPE attribute in Creo. So one easy fix would be to set up templates with this attribute. However, sometimes the engineers don't use these templates (because they forget about it). So are there other ways to ensure that the correct EPM Document type is used?

We have ThingWorx 10.1.0-b47.  It appears that the "Service editor theme" in User Preferences is not working.  I believe it was still working as expected before we upgraded as I utilized the "Dark" theme.  Now it appears to use "Light" no matter which setting I select. Can anyone else confirm this behavior in TW 10.1?

Hi All, some time ago I made a customization which automatically writes the values we want to the OOTB line number attribute in wtparts at check-in, using a listener.But as it turns out, reality is always more complex than the plan you have and your users say they want...As of now, I found no way to ‘unset’ (aka delete) an existing line number. That sounds strange, but maybe I am just not proficient enough to read and interpret the javadoc ...🙈The use case could be coined like this: ‘set the line number attribute of part usage id-xy (which, by the way, now has the value ‘123’) to an ‘empty’ value.‘So, right now the tool is writing the line number like this to the attribute:long NewlineNumber = 123;LineNumber TheNewlineNumber = new LineNumber();TheNewlineNumber.setValue(NewlineNumber);usagelink.setLineNumber(TheNewlineNumber);PersistenceServerHelper.update(usagelink);We have left the attribute with the OOTB constraints, so it should be possible to have an empty value:This works via the

I recently purchased a student licence for Mathcad Prime 12. After download, unzipping and installation, when I try to open the app, it automaticly crashes. After analyzing it with Eventviewer it seems that the app cannot locate resource 'worksheetresources.xaml'.What can I do about it?

What happened to the ability to get a daily digest of all new activity instead instant activity?

Version: Windchill 13.0 Use Case: I am trying to bulk load part instance and part configuration objects into Windchill and to establish the links between them and the parts they are related to.Description: I was hoping to be able to do this with the REST API but it doesn't look like there are end points available to allow this to be done. Can anybody recommend an alternative approach to achieving the same goal?

测试

How can the default on drilled holes be changed to 140°?  While 118° may be standard for a lot of drills, almost all of our drills Ø3/8 and up to Ø1-1/4" are 140° inserted tips.  As a Creo NC user, I change models all the time sent to me by Engineering that have holes put in at 118°, just to match the drill that I will actually be using.

Hello,I have tried to upload the mathcad file, but it does not allow me. The following was working in mathcad 15, but it does not evaluate in prime Thanks,Sam

 Hello Community,I have tried to install ThingWorx and Windchill Navigate, but I am facing a few issues. Could you please help me? When I am redirected through the Windchill address I connected to, a Status Code: 500 Windchill error screen appears. I edited the Windchill wtproperties file, but it did not resolve the issue. ThingWorx opens successfully, but the ThingWorx Mashup Runtime displays a blank screen. What could be the reason for this, and how can I fix it?  

I need to populate the New Number field for thousands of parts/assemblies in Windchill. See attached example: The New Number simply needs to be the string between the first underscore and the file extension of the File Name field (red font). I hope I don’t have to individually copy paste each of these.  

Hi all,For our assemblies, we add a BoM table to the drawing. These were setup a while ago, and we have a few different tables saved for different purposes. The main one is a simple table with a repeat region as followsThis works fine for most of the parts, but it doesn’t allow us to define a different part number other than the one defined in Windchill. If we were starting again with our installation, we would probably add a relation in the start part against a parameter such as ‘BOM_PART_NUMBER’ which defaulted to the Windchill part number but could be changed by the user. This parameter would then be what is defined in the repeat region.However, we now have many thousand parts and none of them have this parameter, and so we cannot change the part number in the BoM without changing the file name of the part.Having done some research, it looks like relations can be added to the repeat region, and so a conditional statement can be added. Descriptively, what I had in mind is that if the

Hi ​@PeterCase,below article is no more visible to customers. How to install & configure Jasper Report Studiohttps://www.ptc.com/en/support/article/CS336353 Could you please check why this is happening and see if it's possible to make it visible again? MarcoThank you very much  

I'm having issues with Windchill randomly booting me out of the renaming process of my files.More specifically, I'm trying to rename a list of new files in my Workspace before checking them in. When I start renaming them, Windchill will suddenly and without warning boot me out of the process which forces me to redo it again. It's getting really frustrating. I'm trying to replicate the issue. It seems using a combination of the Shift and Space keys on your keyboard seems to trigger it.Anyone else ever have this problem?

Hello!A new year and a new crash unfortunately.I was working with this document and saved it. The next day when opening it i just get "The file type is not supported".Can it be recovered? Would help alot 🙂I attached the failing document and a log fileKind regards, TomPrime;7.0;FileNotSupported;Crash;MathcadPrime