Solved

I have a report where I am using the historical view to show trackers at a specific baseline. Currently, I have only been able to display one baseline at a time. Is there a way to show multiple baselines in the same report? Thanks,Brian Kampling - Source Allies

I need to add a summary at thr bottom of my calculation to shoe results as shown below.I am not able to do.I request shed me with some lights to get around this.

I am working on a sample to develop my calculations.I used both If .. Then and While.But, I can get the results: J is not adding up. Looks like J keeps remaining at 1. I request help. 

Hello, I try to output my fixture offsets with a fil macro given by KenFarley on an other topic but when i try : CIMFIL/ON,SET,OFSETLOFSTYP=POSTF(6,5)OFSREG=POSTF(7,5)IF(OFSTYP.EQ.1)THENIF(OFSREG.GE.54.AND.OFSREG.LE.59)THEN$$CURREG=OFSREGOFSCMD = TEXT/'G90 G',CONVI,OFSREG,2,';'INSERT/ OFSCMDENDIFENDIFCIMFIL/OFF On my machine file i have : ...N0054 ( / SEQUENCE TYPE : PROFILE MILLING);N0056G90G55;N0058 G0 Y5.232;... No spaces before G90 and between G90 and G55.What is the command for output spaces ? Thanks in advance.

Hello Everyone, Has anyone succeeded in implementing a Dynamic banner on top of the Windchill page near the Windchill logo to relay messages to Users like Maintenance details of the system for example? I know of the static display banner which can be used to display text that is updated with a restart of the Windchill, but I'm looking at some ways where it needs to be dynamic without a restart of Windchill, like display content from a text file stored somewhere Thanks in advance! Amar 

I want to take a licence or take 60 days free. I'm a student, please give me free use. 

Version: Windchill 11.2 Use Case: I want to roll back a drawing revision.Description: Using Creo 10.0.8.0.  We created a drawing weeks ago and assigned a number at rev _-. Checked the drawing in but never released it. Engineering decided to change the part number and when I renamed it, the number change was accepted but the rev level seemed to auto-advance to _A without any prompting from me to do so. The only way I can see to get back to rev_- is to delete the drawing and start over. Is there another way to do this? I have this same problem with a couple of other drawings that had been released but not signed off by everyone (so not 'officially' released in my organization) and now there is a part number change required for those drawings that should not necessarily require a revision either. What seems like not so many years ago (to me), this was a drafter level function, pull down tab and you could go backwards if needed.  Any ideas? Thanks.

What is the best way to route cabling? P clips assembly first and then route thru them or any other ideas? Please suggest. See image 

I'm using MathCAD 9.0.0.0. I get this error on my last equation...I don't know what's off because all of these variables worked fine together up until this point. Initially the box was only around the first CDH until I added "explicit,ALL" so that might be something to look at. Thanks,      Brent

Hello to all,as a leader of a 3d-printer at school (class 5-13) I use Creo Elements Direct Modeling Express 8.0 (Deutsch).Since a week I cant download a key from websidehttps://www.ptc.com/appserver/securePeModeling/peManualLic.jsp?lang=de&u=Holger&m=DESKTOP-SEPHVKI&w=6.2&v=40.00Any ideas what is frong? Best Holger

Hello,I need to define a large number of variables, as listed in the attached Excel file.The file includes the variable names, units, and values.Currently, I’m defining each variable and its unit manually, which takes a lot of time.Is there a way to make this process faster—perhaps by using loop processing in a program or some other method? attached file is made by Mathcad10 

Hello All, We have a Haas VF-2 with a Haas HRT210 rotary. I'm machining a block on 4 sides (AO, A90, A180, A270). Working off centerline of the rotary. The problem is that the posed gcode creates A0 and A180 in the correct orientation but A90 and A270 are flipped. In the attached picture specifically (WCS.jpg) depicts how I have the coordinates set up A0 being the top of the part (the face with the cbores).  A270 being the flat face in picture WCS_A270.jpg. Has anyone ran into this problem? Can this be fixed in the post processor application within creo? Thanks,Jostan

Hello. We got a Tormach 1100mx at our work and we use CREO 7.0 for our CAD/CAM. Unfortunately, I could not find a post processor for the Pathpilot on PTC's website. I am wondering if there is a post processor somewhere out there, or do I have to make my own Post processor. Thanks!

How can I define the length of a flange like this in Creo?  Offsetting its distance like this in SE 

Version: Windchill 12.1 Use Case: Based on object affected (type, state, attributes) and the selected end state, the change process automates a minimal list of required roles/approvers.Description:  Wondering if this topic has already been covered?I have seen customization that checked that a given set of Roles in the change process were populated based on affected objects (type, state, attributes).I have also seen the use of a questionnaire with cascading additional questionnaire to define the change process path and approvers. 

I have two list boxes (MathCAD Prime 11.0.0.0), The selection of one list box drives the list of the other box (see picture). The problem I have is the values update on re-opening the sheet. I can get the sheet to remember the 'Type' selection. However I can't get the second list box to remember the selection from the previous save and close. Below is the code in the jscript:- // TODO: Add your initialization code hereListBox.ResetContent();// Add Strings here as needed function ListBoxEvent_Start(Inputs, Outputs) {   // TODO: Add your code hereListBox.ResetContent()if(Inputs[0].Value=="UC"){ListBox.AddString("356 x 406x 1299");ListBox.AddString("356 x 406x 1202");ListBox.AddString("356 x 406x 1086");ListBox.AddString("356 x 406x 990");... (the full script code is attached)So I know/suspect the issue is the 'ListBox.ResetContent()' line but how do I stop the script running on open or remembering the selection, so that it keeps the previous save options?The sheet opt

I see there is a Progress bar component in Creo UI editor.1. Is it possible to have something like a progress circle in Creo UI editor?2. Or a custom gif that we could display to accomplish showing an in-progress operation?cc @GS_14113977 

Is there a api which lets us add multiple users to single role. 

Hi everyone,I’m working with a sheet metal part in Creo 9.0.10.0 that comes off the roll as a single sheet. It is then bent and cut into left and right terminals. I’m trying to unbend these two distinct pieces in one flat pattern but it fails with "Recommended actions: Merge all highlighted distinct pieces to the model."I came across an article in the PTC Help Center that mentions using distinct areas or disjoint volumes, but it’s very vague. The article doesn’t include any images or step-by-step instructions, so I’m not sure how to apply this technique to my situation. (if it even applies) Has anyone encountered this issue or figured out how to do this?I also see that you can turn distinct pieces into separate models but I'm not interested in this approach. I would like to use flat reps if possible. Attached is a screenshot of a  dummy part I made without IP.

Hi there,I have been trying to use the Symbolic Solver in Mathcad prime v10 as shown in the following SS but I could not figure out. Could someone kindly plz help in this one? I would be much obliged. I am trying to get the values of Wa and Wb using the symbolic solver. 

As at least until Creo Parametric 11.0.6.0 when making a cut while using extrude or hole (and several other things that cut through geometry) the default is "Blind" and then with some random depth.It would be far more confienient when this is "Through all" by default. This also solves that much engineers do not take the effort to set the depth to through all so the end of the cutout is somewhere outside the geometry (as shown below)  So make a config.pro option tho set the default to "Through all" for at least the cases shown below.   

Hello, I would like to set up communication between two KEP Servers KEP Server to KEP Server.Currently, the other KEP Server is reading tags from our server,but we are unable to read their tags.Our current license status is as shown below.Do we need to purchase a separate OPC UA Client?If so, how much does it cost approximately?

Reference topic: https://community.ptc.com/t5/Windchill/Limited-access/m-p/582062#M58429   Is it still possible in Windchill 12.0 to change the domain of a folder? When I edit a folder (by right clicking it -> Edit) I don't see the 'Domain' attribute. I'm logged in as a site administrator (but not the default wcadmin if that matters). Or maybe there's some preference/property required?   Here's how the Edit page looks like for me:  

Hi,I have 100 part numbers , in which the drawing has to be opened from windchill into creo session and it should run a particular already recorded map key then it should save back into the workspace or windchill check in , When i tried running the dbatch program in native creo, it says license error. My company has customized tools inside creo and its based on floating license i guess. So is there any ways i can link that creo to the dbatch script or i should go with toolkit api commands or trail_file based scripting ?Does these methods other than dbatch have option to run in background or while the system is ideal (after working hours or scheduled time).   

Version: Windchill 13.0 Use Case: Currently i using windchill 13.1.2.0 version Based on creo view adapter 12.1.0 Microsoft Office 2019 , 2021 , 2022 ,2024 and 365 is it supported OS version 2019 and 2022 ?Description: Currently i using windchill 13.1.2.0 versionBased on creo view adapter 12.1.0 Microsoft Office 2019 , 2021 , 2022 ,2024 and 365 is it supported OS version 2019 and 2022 ?